Diffusors - RPG Diffusor Systems: Modex Plate Low Frequency Absorber

RPG Diffusor Systems: Modex Plate

The First Low Frequency Metal Plate Absorber

Home Theaters and dedicated listening rooms often exhibit poor low frequency response with significant emphasis at modal resonances. This is especially true when they are sonically well isolated, due to massive boundary construction. Porous surface absorption is ineffective at these modal frequencies, because the air motion near walls and in corners is essentially zero , resulting in very low absorption efficiency. RPG developed its Modex™ line to address these problems. We are extremely proud to introduce a new and unique addition to the Modex™ line, called the Modex™ Plate. The Modex™ plate was developed by the Institute for Building Pyhsics at the Fraunhofer Institute, and consists of a damped metal plate system. The Modex™ Plate offers broadband low frequency absorption effective from 50 - 500 Hz in a thickness of only 4 inches. The Modex™ Plate has an attractive powder coated metal finish and can be surface mounted on walls or ceiling. Every now and then a new technology comes along that changes everything. You will be astounded at the transients and clarity of sound, once the Modex™ Plate removes all of the masking low frequency reverberance. Now you can absorb more bass in less space!

Problem

Small rooms like Home Theaters and Dedicated Listening Rooms often suffer from low frequency modal problems.Absorption at these frequencies requires a high absorption efficiency, significant surface depth and large coverage area,often not available in small rooms.

Solution
The Modex™ Plate solves these problems by offering significant absorption between 50 and 500 Hz in a surface depth of only 4 inches. The Modex™ Plate represents a new generation of acoustic bass management.Now you can absorb more bass in less space!

Installation
The Modex™ Broadband is installed by attaching metal “L” brackets to the boundary surface and sliding the panel and screwingn to brackets. Panels should be installed at high pressure locations.In order of highest to lowest efficiency, this would be the intersection of three boundary surfaces,two boundary surfaces and on one boundary surface

Specifications

Absorption

Surface or corner applied porous materials lose efficiency at low frequencies,because the particle velocity or air movement associated with these long wavelengths is low. The Modex™ Plate consists of a damped steel plate system. This reacts in a mass-spring manner offering absorption via three mechanisms. First,the metal plate provides pistonic absorption down to 50 Hz by vibrating against the “spring” of the porous backing. Second,the bending modes of the free-moving plate are heavily damped by the proprietary adhesive coupling with the porous backing up to about 125 Hz. Lastly,mid-frequency sound waves diffract around the plate’s edges to be propagated and thus dissipated in the deep passive porous absorber layer. Together,these mechanisms offer the industry’s first truly efficient, broad bandwidth low frequency absorber with a shallow profile of only 4 inches.

Low Frequency Testing

Many published low frequency absorption coefficients are non-sense, becasue the accuracy of the absorption efficiency decreases at low frequencies in standard ISO 354 and ASTM 423 tests, due to inadequate diffusion. Therefore, additional testing has been carried out at the Fraunhofer Institute in large scale impedance tubes with a cross section of 1.6 x 1.2 m and a special approach monitoring the decay times of the lowest axial modes in a 5x4x3 m room, with and without the sample present on one of the opposing surfaces. You can trust these data to be reliable and accurate.

Product Details & Options
Features Three mechanisms of low frequency absorption in one panel 50 - 500 Hz absorption efficiency High bass absorption efficiency Thin profile Durable powder coated metal finish Wall or Ceiling mounting
Benefits The patented damped metal plate construction offers absorption via pistonic vibration, damped bending modes and porous absorption. The three absorption mechanisms offer broad band absorption with one panel Absorption efficiency is high thus requiring fewer panels for effective modal control The thin 4” profile allows the Modex™ Plate to be used on exposed walls and behind T-bar and stretch fabric systems, reducing the needed depth of previous approaches to broad bandwidth modal control The powder coated finish provides a durable surface finish, which adds a decorative element, as well as the ability to place the modal absorber in highly trafficed areas
Application All critical listening rooms, including recording studios, broadcast studios, vocal booths, home theaters, dedicated listening rooms, quality control rooms, CD mastering, film mix, dubbing stages and music practice rooms.
Installation The Modex™ Plate is installed by attaching metal “L” brackets to the boundary surface and sliding the panel over and screwingn to brackets. Panels should be installed at high pressure locations.In order of highest to lowest efficiency, this would be the intersection of three boundary surfaces,two boundary surfaces and on one boundary surface.

Specifications
Size: 1 m (3’ 3”) x 1.5 m (4’ 11”) x 100 mm (4”) Porous backing: 100 mm Weight: 70lb Finish: White powder coat with perf metal sides Pre-drilled “L”- shaped, metal mounting brackets supplied for easy installation.
Pricing
Order Code	Panel Size	Color/Finish	Units/box	Sq. Ft	Price
MDXP0WHP151S1	60" x 40" x 4"	medium gray	1	16	CALL