RPG Diffusor Systems: Absorbor: CSI Specifications

  1. The Fabric Wrapped Acoustical Panel shall be fabricated from molded fiberglass cores. Edges shall be square and plum to within a tolerance of 1/16". The Absorbor™ shall be of the thickness and sizes as indicated on the drawing.

  2. The fiberglass cores shall have a minimum density of not less than 6lbs/ft cubed (or specify desired density).

  3. Provide mechanical clip mounting system (or specify other desired mounting such as construction adhesive or hook and loop fasteners) as per manufacturer’s recommendations.

  4. Absorption Coefficients and Noise Reduction Coefficient for the product shall be measured by an independent, accredited NVLAP facility according to the test methods as defined by ASTM C 423 and ASTM E 795. Random incidence Absorption Coefficients for a 1" thick, 6lbs/ft cubed density product in an E-400 mounting shall be as follows:



    125 Hz
    250 Hz
    500 Hz
    1000 Hz
    2000 Hz
    4000 Hz
    		 NRC
    0.01
    0.30
    0.93
    1.14
    1.08
    0.97
    		 0.90


  5. Flame Spread and Smoke Developed shall be tested by an independent, accredited NVLAP facility according to the test methods as defined by ASTM E 84 and NFPA 255. The Fabric Wrapped Acoustical Panel shall have a composite Flame Spread Rating of less than 25 and a Smoke Development of less than 450.

  6. The Fabric Wrapped Acoustical Panel shall be supplied in a Guilford of Maine FR701 fabric, color to be as specified.

  7. The overall dimensions shall be 1' 11-5/8"(H) x 1' 11-5/8"(W) x 1"(D) (specify other dimensions if desired) and weigh no more than 4 pounds.